Hyosung’s CO₂/MAG SCR Type Welding Machine is specially designed for the shipbuilding and industrial industry and is a multi-functional model for gouging and manual welding.
- Reduced maintenance time
- It takes approx. 60~90 min to repair the existing control cables
- It only requires 30 min to repair a new 3-line control cable
- Reduced failure rate
- When replacing the existing 9-line control with 3-line control
- Failure rate is reduced by approx. 37.5% with existing single cable (10 lines)
- Failure rate is reduced by approx. 70% with Hyosung single cable (3 lines + 1 spare line)
- Reduced interruption prevents loss
- Lower failure rate reduces interruption and saves cost
- Increases efficiency by reducing interruption
- Only 3 control lines are required to reuse the old machine
- With an additional feeder module, it is possible to utilize the existing feeder and control cable (up to 90M).
- 3-line control is possible by installing a feeder module on the existing feeder (Time required: within 1 minute.Installable by non-expert)
- A communication PCB can be mounted on the existing welding machine, if required, for use for 3-line control.
|Welding machine power supply
||Injection module for feeder
||60SQ+4C(3 Cable+1 Spare cable)+Gas hose